Industries
Precision Engineering
A job shop cannot hold a grade for every alloy that comes through the door. We build a working range around the materials you actually run, so a small tool crib covers a wide job mix without compromise on the difficult parts.
Sub-contract work where every job is a different material and tolerance.
- Typical workpiece materials
- C451.4404AlMg4.5MnCuZn39Pb3Ti Grade 2
What we get briefed on
- 01
One tool crib covering a wide material mix
- 02
Fast quotation support on unfamiliar alloys
- 03
Short lead times on replacement tooling
ISO material coverage
- P
Steel
Unalloyed to high-alloy steel, cast steel
- M
Stainless steel
Austenitic, ferritic, duplex and super duplex
- K
Cast iron
Grey, nodular, malleable and compacted graphite iron
- N
Non-ferrous
Aluminium, copper alloys, brass, plastics
- S
Superalloys & titanium
Nickel and cobalt alloys, titanium, tungsten alloys
Tooling specified into this sector
VC-EM- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
- Hardened materials
End Mills
Solid carbide end mills from 0.5 to 25 mm for slotting, profiling and finishing.
MillingView category
VC-TH- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
- Hardened materials
Tool Holders
Turning holders and rotating toolholders in HSK, BT, SK and polygonal interfaces.
Tool holdingView category
VC-CR- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
Carbide Reamers
Multi-flute carbide reamers holding H7 and tighter in through and blind holes.
Hole makingView category
VC-RD- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
- Hardened materials
Carbide Rods
Ground and as-sintered carbide blanks with straight or helical coolant channels.
Engineered & materialsView category
VC-GR- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
- Hardened materials
Grooving Tools
External, internal and face grooving systems from 0.5 to 8 mm width.
TurningView category
VC-CH- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
- Hardened materials
Chamfer & Deburring Tools
Chamfer mills, spot drills and back-deburring tools in 60°, 90° and 120°.
MillingView category
VC-MC- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
- Hardened materials
Micro Machining Tools
Micro end mills, drills and reamers from 0.1 mm for medical and mould work.
MillingView category
Precision Engineering
Working in this sector?
Send us the operation that is costing you the most and we will come back with a specific recommendation.
What you get back
- A specific tool recommendation with the reasoning behind it
- Starting cutting data with the limiting factor identified
- Lead time and pricing against a fixed part number
Technical response within one working day. Monday to Friday, 8:00 AM – 5:00 PM CET