Chamfer & Deburring Tools
Edge condition is a drawing requirement, not an afterthought. These tools produce a repeatable chamfer or radius in a single pass, including on the far side of cross holes.
- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
- Hardened materials
Why this range
- 60°, 90° and 120° included angles
- Front and back deburring with one tool
- Ø2 – 20 mm in two, three and four flutes
At a glance
- Series
- VC-CH
- Family
- Milling
- ISO coverage
- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
- Hardened materials
- Recommended grades
- VC1025VC4005
Specifications
| Parameter | Value |
|---|---|
| Cutting diameter | 2 – 20 mm |
| Point angle | 60° / 90° / 120° |
| Number of flutes | 2, 3, 4 |
| Shank diameter | h6, 3 – 16 mm |
| Coating | AlTiN, TiAlN, uncoated for ISO N |
Applications
- Chamfering
- Deburring
- Counterboring
ISO material coverage
Application windows this family is specified into. Grade selection narrows within them.
- P
Steel
Unalloyed to high-alloy steel, cast steel
- M
Stainless steel
Austenitic, ferritic, duplex and super duplex
- K
Cast iron
Grey, nodular, malleable and compacted graphite iron
- N
Non-ferrous
Aluminium, copper alloys, brass, plastics
- S
Superalloys & titanium
Nickel and cobalt alloys, titanium, tungsten alloys
- H
Hardened materials
Hardened steel 45 – 65 HRC, chilled cast iron
Recommended grades
Grades released for this family, with their position on the toughness and wear-resistance axis.
VC1025
PMSPVD AlTiN
- Toughness
- 64
- Wear resistance
- 70
VC4005
NSUncoated ultra-fine
- Toughness
- 80
- Wear resistance
- 44
Where it is used
Related categories
VC-EM- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
- Hardened materials
End Mills
Solid carbide end mills from 0.5 to 25 mm for slotting, profiling and finishing.
MillingView category
VC-CD- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
- Hardened materials
Carbide Drills
Solid carbide drills 3×D to 30×D with internal coolant and self-centring points.
Hole makingView category
VC-MC- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
- Hardened materials
Micro Machining Tools
Micro end mills, drills and reamers from 0.1 mm for medical and mould work.
MillingView category
VC-CH
Specify this for your operation
Send the material, machine and current tool. You will get a part number and starting cutting data back within one working day.
What you get back
- A specific tool recommendation with the reasoning behind it
- Starting cutting data with the limiting factor identified
- Lead time and pricing against a fixed part number
Technical response within one working day. Monday to Friday, 8:00 AM – 5:00 PM CET